HKS EVC6-IR 2.4 Electronic Valve Controller
LCD full color monitor is upgraded for better visibility. Directly pushing 4 buttons on the unit enables simple settings. Correction map function is added for more precise boost setting.
- EVC6-IR's TFT full color monitor size is enlarged to 2.4 inch from 2.2 inch for better visibility. (The case remains in the same size.)
- HKS boost setting tool "EasyWriter" can be easily connected.
o Boost pressure setting returns to stock pressure value when the unit is off.
Speed Single Input
o Speed signal input enables the boost control with the speed. (500km/h)
o Input of the throttle signal and engine RPM or vehicle speed signals enables the boost control by a 3D map using 2 these signals as axes.
3-mode Boost Setting
o Boost pressure can be set in 3 different modes to use them for different conditions.
Triple Digital Meter
o 3 digital data readings of surge tank pressure and throttle angle, engine RPM or vehicle speed can be displayed in real time.
3-mode Offset Setting
o The differences between the boost pressure set value and actual value can be offset in 3 different modes. This ensures more precise setting.
Bar Graph Selection
o Select the type of a bar graph from the boost pressure, throttle angle, engine RPM and vehicle speed.
o If the boost exceeds the warning value, an audible beep and visible warning display notify the user. Also, the boost is lowered to the stock value or a preset value to prevent damage to the engine.
Throttle Signal Input
o Throttle position sensor signal input enables the boost control with the throttle angle.
Engine RPM Signal Input
o Engine RPM signal input or ignition signal input enables the boost control with the engine RPM. (1 to 8 cylinders/up to 12000rpm)
o All settings are stored in the internal memory; so settings will not be lost even when the ignition is off or the battery is disconnected.
o Data can be locked with a password; it prevents data loss or inadvertent data changes.
o Select the unit from kPa or PSI.
o The side of the buttons can be switched by flipping the monitor vertically.